FUJIAN FUFA ELECTRICAL CO.LTD

FUJIAN FUFA ELECTRICAL CO.LTD


Call us at 0086-15959312812 or Leave us a message
 CHINESE    ENGLISH
Products List
  Electric Motor
  Three Phase Electric Motor
  Single Phase Electric Motor
  NEMA Standard Motor
  Special Purpose Motor
  Russia gost motor
  DC Motor Medium Size
  Power Generator
  Water Pump
  Reductor
  Industrial Fan
Contact us
Contact Person: Sales Manager
Tel: 0086-15959312812
Fax: 0593-6350350
Skype: fufamotor
E-mail: sale@fufamotors.com
E-mail: info@fufamotors.com
E-mail: technical@fufamotors.com
   
Home >> Product >>Z4 Series Medium Size DC Motor
Z4 Series Medium Size DC Motor
Z4 Series Medium Size DC Motor
Z4 Series Medium Size DC Motor
Z4 Series Medium Size DC Motor

Description:

The Z4 Series DC Motor are dominant products of our factory with over 20 years technic experience.Widely used as prime drives in various machinery,such as lift and cableway,Rolling mill,Hoisting and travel gear forcranes,Extruders in the plastics industry,printing machines and paper machines.

Outline mounting dimensions of the motors comply with IEC72

standard,except for the axial distance between the mounting holes(dimension B).Performance and technical requirements of the motors can be checked in accordance with IEC34-1 standard of the IEC or DIN57530 Norm of the Deutsche Industrie-Norm.The angular shape of the machine makes good use of space.The motors have laminated yokes,which means when used on rectifier power supplies they can endure ripple and rapid current changes(load change) under dynamic condition.
   
The stator design leads to high accuracy of pole spacing and consequent good communication.
The motors are class F insulated with reliable insulating construction and impregnating process,ensuring stable dielectric performance and excellent heat dissipation.
The motors possess the features of small size,good performance,light weight,large output,high efficiency and reliability,being able to match the current international advanced level.
 
The motors can be lastingly operated from fully controlled three phase bridge without a smoothing reactor.Motors for 160V may be operated on single phase bridge thyristor.In that case,a smoothing reactor,whose inductance is specified in the relevant technical data,should be inserted in the armature circuit to suppress ripple current.



Electrical machinery performance:

1.Data listed in the technical data sheet should be employed under the following conditions;
a.Aitirude above sea level maximal 1,000m;
b.Cooling air remperature maximal 40℃;
c.Ambient conditions for motors should be free from acidic, alkali fumes or other aggressive gasea which corrode insulation.
d.Duty: Continuous (SI);
e.Armature and field circuits for motors may be either operated on static thyrisier controlled supplies, or from d-c generator;
f.Performances of motors all comply with State Standard GB755. Fundamental technical rules for electrical machines.
2.Standard rated voltage: 160V or 440V, Values for 220V, 400V, and 660V or other voltage may be derived on request.
3.Rated speed:
3000,1500,1000,750,600,500,400,300 and 200 r/min, totally nine grades. Decrease armature voltage to make speed regulating under constant torque, lowering down field voltage to make speed regulating at constant output. Speed regulating range: see technical date . The torque can be remained constant by reducing speed via armature voltage weakening below raced value. It is stipulated that armature speed range can be down to the lowest 20 r/min at constant torque and stable running.
4. Separate excitation is the basic excitation type of the motors. Nominal field voltage: 180V.
Other excitation voltages are also acceptable on request. Forced excitation is allowed with the voltage of less than 500V. When a motors is normally running, its excitation current must not be higher than rated excitation current. To assure the reliability of insulation of excitation system, the motor must be protected against self induced voltages by a release resistor connected in parallel with the excitation circult of the motor is interrupted. At rated field voltage the value of shunt resistor is about seven times filed winding resistance (cold state). While the field voltage is higher than nominal voltage, the value of shunt resistance may be lower than seven times field resistance, otherwise higher than seven times.
5.For frame size Z4-315, Z4-355, Z4-400 and Z4-450, compensating windings are provided. For frame size Z4-250 and Z4-280 the motors are feasible with a compensating winding too.
6.A marked earthing terminal is provided forth motors.
7.The efficiencies listed in the date sheet are for rated output, voltage and speed, and include excitation lose, exciuding that of separate ventilating fans.

· Model explanation

 
     · Structure
1. Protection, mounting and type of construction:
    a. Type of protection of the whole series: IP21S
    b. Mounting modes comply with the State Standard GB/T997 stipulated as follows:
2. Methods of Cooling:
    Modes of cooling for all the motors are separate cooling, force ventilated. Cooling by frame radially mounted, separately powered ventilating fan, and attached with an air filter. Modes of cooling for motors may be made into three types, namely IC06, IC17 and IC37.
    a. For Z4-100-Z4-160, the blower is mounted on the non-drive side.
    b. For Z4-180-Z4-450, the blower is mounted on the drive side.
    c. The required cooling air volume, air pressure and fan motor capacity are shown below:
   Table 1)

Frame Size

Air Volume

Static Pressure

Motor Output

m3/h

Pa

Kw

Z4-100

160

200

0.04

Z4-112

220

300

0.06

Z4-132

360

450

0.18

Z4-160

790

600

0.37

Z4-180

1200

940

1.1

Z4-200

1600

800

1.1

Z4-225

2880

1400

3

Z4-250

3000

1400

3

Z4-280

4000

1600

4

Z4-315

4680

1600

5.5

Z4-355

5200

1600

5.5

Z4-400

7200

1800

5.5

Z4-450

9000

1800

7.5


*  All the ventilating fan motors are of three phase, two pole, 380V.
    Motors with the following five methods of cooling can also be ordered, but prior consultations are needed.
    a. Frame size 100 up to 250 may be made into the totally enclosed, frame cooled motor (IC410).
    b. Frame size 160 up to 250 may be made into the separately ventilated motor with blower mounted on its non-drive side (IC05).
    c. Frame size 100 up to 200 may be made into the self cooled open motor with its own fan mounted on the shaft (IC01).
    d. Frame size 160 up to 355 may be made into totally enclosed motor with internal cooling air circulation by independent air-air heat exchanger mounted on it (IC666).
    e. Frame size 160 up to 450 may be made into totally enclosed motor with independent air-water heat exchanger mounted on it (IC86W).

3. Standard terminal box mounting is the right hand side seen form the drive end of the motor. As an alternative, mounting at the top or on the left-hand side is possible on request.

4. Motors if needed can be fitted with tachogenerator or other accessories at the non-drive end.

5. Motors, when directly coupled, must use elastic or flexible couplings. The drive and driven units must be aligned with the utmost care. Radial forces acting on the shaft-extensions (belt or pinion drive) must not exceed the values given in the diagrams in the following pages (see Appendix2). Motors are of compact structure, elegant appearance, spacious terminal box, easy wiring, servicing and maintenance.


Home  |   About us  |   Products  |   News  |   Workshop  |   Feedback  |   Contact Us  |  
Tel:0086-15959312812 Add:6#HAIXI INDUSTRIAL ZONE NINGDE CITY,FUJIAN ,CHINA  
CopyRight 2011 All Right Reserved FUJIAN FUFA ELECTRICAL CO.LTD
Skype
E-mail
E-mail
E-mail
Inquiry